Hydrocarbon's catalog

CYLINDRICAL HORIZONTAL TANKS

from 1 500 L to 40 000 L

NF EN 12285-2 Standards

For over or under ground storage.
Simple or double casing*

*double casing tank : delivered with filling set, leak detection, liquide of control and extra jerrycan.

OIL RETENTION CONTAINER FOR CASKS

Type paletts, without casters

Galvanized sheet or paint with RAL 7011 (other color available on request).

Galvanized grid.

With or without casters.

Caasters container – width for a service door.

for 1 – 2 or 4 casks of 220 liters depending on the model.

Craddles for horizontal casks.

RECTANGULAR TANK

700, 1 150 and 1 400 L

With feet and tap.
Paint.
Meeting N.F. M 88 940 standards
Tested to 0.3 bar
4 holes 50/60 (no gas) on top part and 1 bottom part.
1 oil tap and 4 removable feet

To store safe from moisture .
Not to buried.
Packed material for delivery.

TANK OF RECOVERY OF WORN OIL

Sheet steel.
Painting according to RAL 7011 (other colors on request).
Rectangular tank doubles casing meets NF M 88 940,
Tested to 0.3 bar.
Opening of filling Ø 350 mm with grid of filtering and tilting lid.
4 openings 2" high part with stoppers

Option : Manual pump empties casks with plunger cane length 900 mm to transvase the contents of the cans in the tank.

DRUMS DRAINER

Drums drainer
on 2 shelves ou 5 shelves
Galvanized sheet
Jamb : 20/10 mm
Drums stand : 10/10 mm
Delivered in set on a wood pallet

PHYTOSANITARY CABINETS

Including :

Two or four retention containers (according to height), stronger door and bottom, swing doors with a Ronis 2 points lock, packed on wood pallet (4 cardboard coin, plastic packaging), stickers for phytosanitary standards.

OIL RETENTION FOR TOTA TANKS 1000 L

Bac de rétention pour cubitainer (Custom)

Galvanized sheet or paint with RAL 7011 (other colors possible on request).
Galvanized grid.
for 1 tota tank 1 000 L.

SETTLING TANK

Paint.
For diesel fuel, fuel, motor oil, etc.
Top part with a 50/60 half sleeve on wich you can fix a pump,
2 draining taps 20/27 (reserve between the 2 levels 100 L).
Draining openings for settling.

METAL LOCKER OF MONOBLOCK WORKSHOP TYPE B - dusty industry

With feet

►The model is in 1, 2 or 3 cases in monoblock construction, each case includes one top shelves for helmets’ storage. Under this shelves, a vertical wall with 2 compartments (one for workclothes, the other one for cityclothes with a rod for hangers)
►Great rigidity – available with or without feet
►Main part in sheet steel of 08/10°, under in 10/10°
►Door in sheet steel of 10/10 ° reinforced – closed door by a simple push
►Ventilation by 4 groups of 5 ouies
►Feet are studied to avoide ground degradation by scratches or shear

OUR SPECIAL CREATIONS


	Container and retention container with table	Vertical container 1400 liters

	2 containers 1 400 L and retention container with table	Double casing container 2000 liters

RETENTION CONTAINER FOR TANK

Paint.
Container not to be buried.
Envirommental protection, in case of leak.

RECTANGULAR CONTAINER

Meets NF M 86-255 standards
Not to be buried.
Simple casing.
Outside paint.
Man hole Ø 400 mm thick. 4 mm with reduction :
2 holes 2" (50/60).
1 hole 1"1/2 (40/49).
1 hole 3/4" (20/27).
1 hole 1"1/4 (33/42).

LIGHT TYPE CONTAINERS as "CONTAINERS FOR BATTERIES"

Meeting NF M 88-940 standards
Not to be buried.
Simple casing.
Red paint
Combine with a maximum of 3 pieces.
2 feet bas amovibles.
3 holes 2" (50/60) on top.
1 holes 2" (50/60) on front with reduction and stopper 3/4" (20/27).

STATION DE DISTRIBUTION CYLINDRIQUE AVEC ARMOIRE

There are no translations available.

Citerne cylindrique double enveloppe en acier peint conforme à la norme en vigueur NF EN 12285-2 avec armoire vérrouillable sur longeron abritant une pompe à fuel, un support pistolet, le systéme de remplissage sécurisé, un enrouleur (option).
Plus d'options possibles sur simple demande.

STATION DE DISTRIBUTION CYLINDRIQUE AVEC PETITE ARMOIRE

There are no translations available.

retailStation_de_distribition_petite_armoire-2

Citerne cylindrique double enveloppe en acier peint conforme à la norme en vigueur NF EN 12285-2 avec une petite armoire vérrouillable, abritant une pompe à fuel, un support pistolet, le systéme de remplissage sécurisé.
Plus d'options possibles sur simple demande.

CYLINDRICAL FUEL DISTRIBUTOR

from 2000 L à 20 000 L

Painted fuel distributor meeting NF EN 12285-2 standards.

Double casing equipped with :

1 filling set with a mechanical gauge, pump joint, with plug and vent.
1 distribution set including 1 single-phase electric pump 230 V 50 Hz50 l/mn with a suction system. Flexible pipe 6 m and automatic gun with anti-condensation filter.
1 leak detection set.
1 system of laying.

RECTANGULAR FUEL DISTRIBUTOR

Station de distribution 1400 L avec volucompteur (Custom)

700, 1 150 or 1 400 L

Fuel distributors 700, 1150 or 1400 l.

Composed with a tank, a retention container, a single-phase electric pump 230 V 50 Hz with 50 l/mn distribution automatic gun, with 6 m flexible pipe, telescopic immersion heater, joint 2", valve and filter.

With or without volummeter.

RECTANGULAR FUEL DISDTRIBUTOR 2000 TO 4000 L

From 2 000 to 4 000 Liters

Rectangular fuel distributor 2000 L.

Composed with a tank, a retention container, a single-phase electric pump 230 v 50 hz with 50 l/mn pump, an automatic gun, with 6 meter flexible, telescopic immersion heater, joint 2", valve and filter

RECTANGULAR FUEL DISTRIBUTOR WITH CABINET

stationdistribution_rectangulaire_armoire_2

From 2 000 to 4 000 Litres

Ready to lay on the ground and totaly secure including :

Rectangular tank meeting NFE 86-255 standards, with double casing as retention.
Cabinet with Ronis lock and secure man hole Ø 400 mm
Distribution system with pump 56l/min., volummeter, automatic gun and 6 meter flexible pipe with anti-condensation filter and suction set.
Mecanic gauge, filling plug in front, vent.

FUEL DISTRIBUTOR 2800 LITERS

2 800 Liters

Including :

2 rectangular tanks laying together meeting NF M 88 940, standards éprouved to 0.3 bar.
1 retention container with same capacity of tanks.
1 distribution set including a single-phase electric pump 230 V 50 Hz, 50 l/mn with volummeter, automatic gun, a 6m flexible pipe, a suction system and anti-condensation filter.
compressor valve and filter cartridge.
shelf of work on the front.
Removable with lifting truck.